• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go inside and out as they please without you needing to let them in or out. They also help prevent your cat flap installer from toileting in the house.

It is much easier to put a cat flap on a upvc panel than one made of glass but you'll require some knowledge and right tools.

Measure the Door

Fitting a cat flap in a door can be tricky but if you use the correct type of cat flap, take your time and follow the directions provided, it should not prove to be a problem. We will be showing you how to draw the shape, use a jigsaw to cut out the area in the door and then finish off the job by securing the flap to the door. This will ensure that the flap remains in place and protects the door from wind and rain damaging the door.

To determine the size of the cat flap you need, measure your pet's width. This will allow you to select a cat flap that is big enough to allow your pet to enter the home and exit without having to open the door each time.

Once you have the measurements, you can determine the area on the door where the template should be placed. usually this is done with an X, but some kits come with an illustration that outlines where to drill, if you have one, then attach it to the door and draw a line around the door. If your door has a moulding or sill on the bottom of it then make sure you have enough clearance from these as this will keep your cat safe and prevent them gaining access to your home.

Use a set square to check that you're cutting properly and ensure that the hole is a perfect rectangle shape. Once you are happy with this, you are able to start removing the remaining door material. Use a set square to ensure that you're cutting the material in a proper manner and that the cut is a rectangle. When you are happy with the result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without worrying about them being in the house with a visitor, or leaving unwanted gifts in the house. It also prevents draughts, and keeps your home's temperature stable. However, installing the cat flap to your door might seem like an overwhelming task for those who have never done it before. This can lead many people to call a professional carpenter or joiner to do the job instead. This is an option but you can do it yourself if the tools are right and the instructions are adhered to.

While this is much simpler to accomplish when using a timber door it is still possible in uPVC doors - although you must be careful not to scratch the doors as this will cause damage to the warranty. First, you need to take measurements of the door to ensure that it can accommodate the new cat-flap. If you have an ordinary uPVC panel, this should be easy. However, if your door is composite or a different type of door, you might have to be more cautious.

Next, you will need to determine the height of your belly for your cat. This is the height between the floor and the underside of your cat's stomach. It is important to find an area at the entrance that will allow your pet to comfortably pass through. Once you've got the information you'll have to mark the area with a spirit level and a pencil so that you are certain that the hole will be suitable for your cat.

Once you have marked out the area, it is time to cut out the hole. You will need to use the jigsaw, and it is crucial to be patient to ensure that the cuts are smooth and straight, rather than uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask while working with a jigsaw. Inhaling sawdust is dangerous for your health. After you've cut the hole, you will require sandpaper for smoothing the edges so that the cat flap can be easily inserted into the hole.

Make a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit is quite difficult. It is tempting to tackle the job yourself, but unless you have a lot of expertise in DIY, it's probably best to get a professional in to do the task for you. A botched job could not only be unsightly but also pose an security risk. It could let cold air in when the cat is outdoors and hot air out when inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure that it is correctly positioned and runs flush with the door's other parts. Make sure you have some sandpaper on ready to smooth any edges.

Once the line has been drawn, you can cut the hole using a jigsaw, remember to wear any safety equipment for working with the power tool. If you are concerned about the noise of the jigsaw, you can purchase a cordless version which is much quieter and easier to use.

It is best to only remove the material needed to create the cat flap. It is important to leave a bit of material to cover the wall of the flap. However cutting off too much material can cause issues or even damage the door frame.

A upvc door may have a metal frame or panel that will interfere with the microchip cat flap in this case you will need to cut an over-sized hole to ensure that the metal does not get in contact with the wall of the cat flap. If this is the case, it is crucial to fill in the oversize gap and render it watertight.

If you want to install a cat flap in a double-glazed or upvc window with frames made of metal it is necessary to speak with a specialist. They will provide you with a new piece of glass that has the hole that is already designed for the cat flap. It is much less expensive to get this done rather than trying to fix the flap to an existing pane of glass that has not been manufactured specifically for the purpose.

Fit the Flap

Cat flaps let your pet come and go at their own pace, giving them the freedom to lounge inside the house when they're feeling like it. However, if you own a uPVC door, it may be difficult to fit an animal flap, especially in the absence of glass panes that can be cut to fit one. If you're willing to buy and install a half-glazed replacement uPVC panel then it is possible to install the cat flap in upvc door panel (my sources) flap to the doors. It's not just a matter of cutting an opening in the door. You'll also have to do a few things to ensure that the door is secure.

A composite, upvc door panel cat flap, or GRP door panel is typically comprised of a plastic skin that is bonded to an insulating polystyrene base. The material is fairly fragile and care must be taken when cutting into it to avoid causing damage. This type door has a template you can use to make the hole.

Once you've marked the hole in your front door, it is time to put in the cat flap installation flap. You can buy and fit a wide variety of different models that range from simple push-button operated models to microchip-activated ones that allow access only to your pet. Whatever type of cat flap you pick, it's vital that your cat can utilize the flap with ease without getting stuck outside in bad weather.

It's a good idea to choose circular fittings rather than one that is square, since circles can be more securely cut into the door glass. This is because square holes make the glass more susceptible to cracking when drilling is applied to it. This is also a safer option since you don't have to drill into the toughened glass that could break and cause harm to your pet or family members. This is particularly crucial if you have children or elderly people in your home who could be injured by glass fragments.